Why Should You Have a Ghost Immobiliser Installed?
Autowatch Ghost is an innovative car immobiliser of the future that shields your vehicle from theft. It operates quietly by connecting to your vehicle's CAN data network, and requiring a unique changeable PIN code sequence to be entered in order for the vehicle to start.
The system is quiet and does not come with LED indicators and is unreadable with diagnostic tools. It is also TASSA-approved, and recognized by a few insurance companies.
No key fobs or LED indicators
A ghost immobiliser is a groundbreaking innovation in car security, can prevent thieves from driving even if they have access to your vehicle. It connects to the onboard CAN data circuit of your vehicle and communicates with it quietly, so there are no key fobs or radio signals required, making it difficult for thieves to evade it. It is also undetectable by diagnostics and does not have an LED indicator that could indicate its position. This makes it a good choice for vehicles that are expensive or rare, such as vintage cars.
Autowatch Ghost is a small device that can be concealed within the vehicle's loom. This makes it virtually impossible for thieves or other intruders to find it. The device communicates with the ECU to prevent theft. It connects to the CAN (Controller Area Network) system. It is simple to install, and can be done in less than an hours. It is also a lot less intrusive than other anti-theft devices, such as steering wheel locks.
The device is based on the same technology as GPS tracking devices, however it helps prevent theft of cars by preventing the vehicle from getting started. It makes use of buttons on your car to generate an individual, unique, and changeable PIN code that must be entered in order to operate your vehicle. The device can be programmed to use obscure buttons, such as those on the back of the rear demister to make it harder for thieves to guess the PIN. This type of technology has become more and more popular, and a lot of insurance companies now require it for vehicles with keyless entry systems.
Another benefit of the Ghost is that it blocks key-cloning and hacking. The device is connected to the CAN bus system and utilizes the buttons on your vehicle to generate a unique, programmable code that must be entered before the car can start. The device cannot be defeated by modifying the ECU or by introducing new key fobs. The thief will need to make use of a special device to bypass the immobiliser.
The cost of the ghost immobiliser is affordable and can be used in conjunction with an GPS tracker to ensure your vehicle's safety. It's an excellent option for older vehicles and can save you money on insurance premiums. Contact Trackershop to get an estimate on ghost immobiliser. We'll add the installation into the cost, so you can have peace of mind about your vehicle's security.
It is TASSA Approved
Immobilisers are the best method to protect your vehicle. It can disable features like the starter motor or fuel pump when the PIN code is not entered correctly. Having an immobiliser professionally installed is essential. The installer should be TASSA approved, which ensures that the product is safe and functions properly. The process involves checking the credentials of the installer, which includes a criminal record check and identity verification.
The Ghost immobiliser has been designed to deter thieves from taking vehicles. It connects to your vehicle's CAN data network and works without the need for additional fobs, or aftermarket alarm systems. The system is quiet and isn't detected by thieves or car trackers. The system uses buttons on the steering wheel as well as the door panels and the central consoles to generate a unique PIN code. The correct sequence has to be entered to start your vehicle, which makes it extremely difficult for thieves to crack.
This revolutionary immobiliser is TASSA-approved and can be installed by Trackershop an organization which specializes in the installation of this device. It also offers other security products, such as a remote starter and a device to track theft. The team of technicians is completely mobile and can install the device at workplace or at your home.
With more and more cars being stolen without the owner's keys, it's essential to secure your vehicle. Modern vehicles that are keyless are particularly vulnerable as it is easy to purchase cloning tools and door lock picks on the internet. Autowatch ghost installation near me is a great way to prevent this as it isn't recognized by thieves and won't even be picked up by vehicle trackers.
The ghost installers near me II CAN is completely hidden and cannot be tampered by thieves. It can detect attempts to tamper the ECU and will shut down certain parts of the engine in order to stop it. In addition, it can even disable the car alarm to prevent attracting attention and allowing thieves to escape from the vehicle.
Reversible
The Ghost immobiliser can be fitted or removed at any time. It is directly connected to your vehicle's CAN (Controller Area Network) and provides protection through a personalised PIN code, which is a secret sequence that only you will know. If the PIN code has been entered correctly, the vehicle will not start, and thieves are discouraged from attempting to steal it.
The installation of the Ghost does not affect the warranty on your vehicle. The system is compatible with any alarm or tracker that you may have installed. It will not leave an imprint on the exterior or interior of your car. In contrast to other immobilisers, it does not utilize LED indicators or key fobs, which makes it difficult for thieves to spot it.
Car thief gangs that are organized are now using devices to read circuit wires in vehicles, however the Ghost Immobiliser does not use any of these methods. It uses buttons on the dashboard or the steering wheel to create an individual PIN code. This code is required to start the car.
Additionally to that, the installing ghost immobiliser Immobiliser can also secure your vehicle from OBD port hacking. This kind of theft is becoming more frequent and is one of the hardest to prevent. The Ghost Immobiliser can help prevent these thefts by stopping the thief from connecting a laptop to the vehicle's OBD port and cloning your keys.
The Ghost can also be used with a car tracker, which is extremely useful in locating your vehicle after it's been stolen. It is not recommended to use a tracker for your primary security measure against theft since they don't stop the theft. They are also easier to detect and remove from vehicles than the Ghost immobiliser.
It is easy to install
A Ghost immobiliser is an innovative technology that will protect your car from theft. It connects to the CAN (Controller Area Network), which is a security system that is installed in your car, and creates an individual code that thieves are unable to penetrate. It's a cost-effective and highly effective method to protect your vehicle from being taken.
Ghost is designed to work with all cars which include aftermarket key fobs. Ghost generates a unique PIN code that is entered using the buttons on your dashboard, central console and the steering wheel. This will stop thieves from starting up your car. It also offers a range of other features, including a GPS tracker that will locate your vehicle.
This kind of device is a very popular choice for many drivers due to the fact that it offers security against different kinds of car theft. It's simple to install, operates silently and doesn't require radio signals. It's also a good option for those who don't wish to purchase a full alarm system. However, it is essential to have a professional install the device to ensure that it works properly.
If you're considering a Ghost immobiliser, it's important to install it by a professional to ensure that it's working just as it should. A professional will know where to place it and will ensure that the unit is properly connected to the electronic system in your vehicle. The installer will also make sure that the device is hidden from view and can't be visible to anyone without a specific reason for knowing about it.
The Autowatch Ghost II can be set to Valet/Service mode, which allows you to drive your car at 30mph without needing the access key. This makes it ideal for valet parking as well as transporting your vehicle. This mode can be used even when your car is being repaired by dealers. This mode is easily turned off via the companion app and then reset after each use.
The ghost immobiliser install is the only aftermarket CAN-bus immobiliser that does not require cutting wires. It connects directly to the CAN system onboard of your vehicle. It's not able to be detected by tools for diagnosis or cloning. It is tamper proof silent, quiet, and doesn't emit any radio signals. It's also reversible. which allows you to move it to another vehicle if necessary.(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311135906_1281855972636056_2987376612771239945_nlow.jpg)
