(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)How to Replace a UPVC Window Handle
If your upvc window handle is damaged, don't be concerned. Replacing the handle of upvc on windows is a straightforward task that can be accomplished in a couple of simple steps.
It doesn't matter if you have an in-line or a crank espagnolette window handle each one has an elongated spindle that extends out of the back plate. This spindle is then fitted into the locking device.
Determine the type and size of the handle and lock.
Over time, window handles and locks can get damaged or lose functionality. It is possible to fix this issue without having to replace the entire uPVC unit. One of the first things to do is identify the type of lock and handle you have because this will help determine the replacement parts you will need.
You can determine the type of handle by looking at the base. A screw or pin will secure the handle to its base. If the screw is not present, this can be a sign that the handle has broken away from its base. If the handle is split internally and doesn't grip the spindle anymore It could also be an indication that the handle must be replaced.
There are many uPVC handles that are available, but the Espag handle is the most popular. They are usually secured by two bolts and feature a spindle that engages the lock mechanism inside the window frame. These handles are commonly used on tilt and turn uPVC windows.
Another kind of uPVC window handle is the Cockspur handle. Similar to the Espag handle, but they have a lower projection from the frame. These handles are typically used on older uPVC windows.
Venetian window handles are another option. They are similar to Espag handles, but have a flat bottom that allows them be installed flush with the frame. They are an excellent choice for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. They are also available in a large range cost of a window replacement colours to match any style.
Find the spindle's measurement.
It is important to be aware of how the handle is installed before you can order a replacement. This will determine whether it's tight enough or loose and also if it can fit inside the window frame. It is done by identifying what kind of handle you have and measuring the length of the spindle. The spindle is a metal shaft that connects the handle to the lock in the window frame. It's available in various sizes, with the current industry standard being 8mm. Older handles might have a 9mm cross-section so it's crucial to measure the old one to ensure you get the right size replacement.
There are several types of window handles, but the most popular are inline Espagnolette and the cockspur handle. These handles are operated by with a locking mechanism inside the window, using shootbolt rods that lock the window when it's closed. They are secured by pins or screws depending on the kind of handle you have.
You can find replacement window near me handles for windows made of upvc online and in most DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. They can also be key-locking or fire-escape non-locking to provide additional security.
To remove your old handle, open the door and loosen the screws which hold it in place. Store the screws in a container to protect them from damage. After the screws have been removed, remove them carefully from the handle. Take a measurement of the distance from the base of the spindle to the end. This will give you the information needed to buy the correct replacement. The spindle cost of a window replacement the handle is the metal shaft that connects it to a gearbox for locking in the window frame.
Remove the old handle
The Replacement Sash Windows Cost of the handle of a uPVC window handle is a straightforward job that usually takes no more than five minutes using the right tools. The first step is to determine the kind of lock and handle that will allow you to find the correct replacement. After that, weighing the spindle will help ensure that the new handle is a suitable fit. The handle that was used previously needs to be removed and replaced with the new.
The majority of uPVC handles are inline Espagnolette handles, with an integral spindle that slots into the locking mechanism of the window. They are usually easy to remove but may require force if they get stuck. The handle is usually secured by two screws, which you can remove with a screwdriver. It is also possible to remove pins, based on the kind of handle.
After removing the screws, you can take off the old handle. When the handle is open, the top of the baseplate will be visible. This will reveal two screws that can be removed. If the sticker remains in place, you'll need to take it off.
It is now possible to screw into the new handle using the screws that came with the old handle. Make sure that the handle is in the unlocked or open position, then align the screw holes with the holes on the window. After you have done this then replace the cap screws. Test the new handle. It's easy to change a uPVC handle, but you need to do it correctly.
Install the new handle
It's time to install your new handle if it has been successfully removed the old handle from the frame. Begin by finding the screw covers and levering them out with your screwdriver. Once the screw covers are removed, put them in a secure location before proceeding to the next step.
Then, screw the spindle in by aligning it with the existing hole. Make sure that you align the holes in the handle with holes in the window frame. You should use a screw identical to those used previously, or it could cause the handle to not being secure.
uPVC Espag handles come with a 7mm square spindle that turns the lock mechanism that is installed to the window. This style of handle is found in the majority of modern uPVC Windows. uPVC Cockspur handles (also known as Cotswold handles) have long noses that lock over the outer frame or transom bar cross member. They are commonly found in older uPVC windows.
After the new handle is in place, it's important to ensure that it operates properly by locking and unlocking the window several times. If everything goes according the plan, the replacement uPVC handle should be securely fixed and operating smoothly. If not, the steps listed above will help you identify any issues and fix it quickly. If you're having trouble with your uPVC handle or are experiencing other issues with your home improvement using glazed don't hesitate to call us at Bridgewater glass window replacement for professional assistance. Our glaziers are certified to repair or replace windows with a variety of handles and frames which makes us a great option for your double glazing needs.
Test the new handle
Over time, the handles of uPVC can become damaged and worn out. This can make them less secure and efficient, so it is important to replace them right away. It's also a good option to consider when you upgrade your windows. Change your lock mechanism and handle will help maintain the integrity of your new windows.
There are a variety of uPVC window handles. Some are attached to the frame with pins or screws, while others are fitted with blades that slot into the lock mechanism. Each type has a distinct way to replace it, and you'll need to know which one you have.
The most well-known kind of window handle is the espag. They're usually found on the latest uPVC Windows. The spindle extends from the handle into the lock gearbox and activates the locking system when you open the window. They're also easy to remove however, you must be careful not to harm the mechanism or the handle while taking them off.
Cockspur window handles are another popular option for uPVC windows. They're held by a spur that is snagged onto the striker plate in the shape of a wedge on the frame, and when you close or tilt the window, it triggers the locking mechanism. This kind of handle is more difficult to repair than other types however it's an excellent choice for the majority of homes.
Venetian window handles are fixed by two bolts and have a slim projection from the frame, which is not the case with the Espag handle. These handles are great if your goal is to have a flush handle which blends in with uPVC window frames. These are a great option for residential and commercial properties.