(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2024/07/Window-Lock-Repairs-2-150x150.jpg)Double Glazing Door Locks
Many homeowners opt for double glazed doors and windows for their insulation and energy efficiency as well as sound reduction. However, they can also be an effective deterrent for burglars.
Check that your double-glazed windows are fitted with anti jemmy hinges to improve their security. These hardware parts are specially designed to make it extremely difficult to pry the window sashes off.
Multi-point locking
Multipoint door locks are one of the most secure security devices you can install at your workplace or in your home. They are nearly impossible for anyone to pick or break, and can be a great option to add to any security system. They can also boost your energy efficiency by reducing drafts and enhancing the seal around the door frame.
Multi-point locking systems comprise of a deadbolt and live bolt (latch) joined by hook bolts below and above the latch, as well as flush bolts that lock into the head and sill of the door frame. They are usually extended across the entire width of the door, or even more. These systems are known as “full-width”, in commercial contexts. They protect the entire opening of the door.
Multi-point locking is offered on most upvc window locking mechanism repair and certain timber doors. This type of lock offers a much higher security level than conventional locks and can be specified as part of an approved by the police Secured by Design initiative for new homes.
When a multi-point uPVC lock door is closed the handle on the outside will activate the latch bolt. The inside handle can be locked by turning the thumbturn inside when the door handle is raised or using the lock key. You should always use a key to lock your door when it's closed. Attempting to force the deadbolt or latch bolt with a handle may damage the lock and the hinges.
If your upvc window locks repair lock is not working correctly, it could be that it's not aligned with the frame of the door. You can test this by placing a spirit level on the top of the door, and checking for any gaps in the miter joints, where the frame is joined to the door.
It is worth asking your double glazing expert if there is a gap and to fix it. They'll be able to repair the lock for you or install a new one. They'll be able to tell if it's caused by damage on the frame or lock unit. In these cases the technician will be able repair or replace the multipoint lock to get it working again.
Espagnolette locks
Espagnolette locks have become a common locking mechanism for double-glazed uPVC windows. They are easily recognised by their flat strip shape which moves as you turn the handle. They work in harmony with secure multi-point locks positioned around the frame to firmly secure and unlock your windows. If you are looking to improve your uPVC windows, espagnolette handles are an ideal option for new builds or renovations. They are available in a broad selection of styles, from period and contemporary. They also have many bar sizes backset options, the height of the mushroom cam and a choice of profiles that can be used for any need.
The espagnolette lock is a popular option, but it has been criticized for providing an inadequate security level on French doors. A single lock point in the middle of the door can be easily accessed. Additionally, it is fairly easy for thieves to open your French doors by pushing the handle to either the left or right. These doors are often used as the primary entry point to your home, and should be kept secure to minimise the risk of unwanted entry.
The espagnolette lock does not function as bolt-like, but is a single-piece mechanism which can be fitted externally on the edge of French doors or internally to the frame of a casement. The mechanism is operated with the help of a handle. It is comprised of a rod which has hooks at its sill and head. The hooks are inserted into sockets in the window lock replacement (visit Postheaven here >>) frame. When the handle is operated the rod is moved upwards and downwards, and the hooks secure into their receivers, allowing them to lock and unlock your windows.
They are a great solution for those looking to improve the security of French doors without compromising on the aesthetics of the door. These types of handles can be paired with a variety of different styles and can even be master keyed for added security.
Like cockspur handles, espagnolette handle are available in both crank and inline models depending on the orientation of your windows. Inline versions turn in the same direction as the original. Cranked versions are available in both right-handed and left-handed options.
Laminated glass
Laminated glass is often used in windows because it is extremely hard to break. It is also more secure than standard safety glass as it is fused together into a single piece rather than breaking into sharp shards. This makes it ideal for both residential and commercial properties.
Lamination is a process that combines two pieces of glass with a plastic interlayer between. The whole piece is then heated and then put under pressure to make it stronger enough for a window or door. The laminated glass that results is five times stronger and a hundred times more rigid than the glass that has been tempered. It also can withstand more intense impacts, and withstand weathering.
This kind of glass is ideal for buildings that require demanding performance like increased safety (impact resistant glass) UV protection or noise reduction. Laminated glass can be paired with a high-performance coat to increase thermal insulation and solar control. It's available in a range of options to fit your budget and project.
Laminated glass is more secure to use than tempered glass since it is cut even after production. It is less likely to break if it's cut from the sides of the glass, rather than the edge. This makes it a good option for glass that cannot open or close, such as cellar windows.
It is also used to reduce the sound that is transmitted through high-rise structures. The Saflex PVB layer in the laminated glasses also helps to block harmful sun ultraviolet rays. This prevents discolouration of furniture, fabrics, and other objects.
Although laminated glass is typically more expensive than glass that is tempered, it has many advantages that can save you money in the long run. It's also more robust and resistant to abrasions and scratches. It can be made to meet your specific requirements. Additionally, it's less susceptible to heat damage, and is a great choice for high-rises and coastal areas. In fact, some building codes require that all exterior doors as well as some interior windows be made from laminated glass.
Friction hinges
Friction hinges are designed to support and hold the position of doors and flaps, panels and windows. They can also resist other hinges' motion and stop hard slamming as well as accidental closing and opening. They come in different dimensions and shapes, and can have a variety of torques. These forces determine the length of time that hinges remain open or closed.
Aluminum is a fantastic material for friction hinges because of its durability, corrosion resistance and high strength-to-weight ratio. It is light and easy to handle. It can also be crafted into a variety of finishes and is simple to install and repair. Brass is another material widely that is used in friction hinges. Brass is an alloy of zinc and copper, and it is naturally resistant to corrosion. It is more durable and stronger durable than stainless steel, however it is more expensive.
The hinges with friction that are utilized in uPVC double glazing door systems can be tailored to meet the specific needs of the particular application. These customizations may include the amount of damping, the lubricant viscosity and the amount of tolerance to space between components, and conditions in which the hinge will be utilized. These factors can affect the dynamic torque of the hinge, and it is essential to keep track of this metric in critical applications.
There are a variety of friction hinges, including detent and one-way. Detent friction hinges don't have torque in the reverse direction. Other variations include discs pipe, and curl friction. Each type of friction hinge is distinct and has its own set of properties, which make it more or lesser useful for certain situations.
Friction hinges are also referred to as 'free-stop' hinges because they permit the lid or door to remain at an angle after the force has been eliminated. This helps prevent injuries through accidental closing. This kind of hinge is perfect for medical, rugged or dangerous areas. The hinges are able to be designed to allow different levels of free play and can be designed to work in a range of angles.(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2024/07/Window-Lock-Repairs-300x200.png)
