Choosing Upvc Window Replacement Hinges
Selecting and fitting upvc windows hinges for replacement isn't as difficult as you might imagine. It is important to check the arrow on the hinges is facing the correct way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.
There are many different kinds of hinges that you can pick from, each one with distinctive features. This article will discuss the most popular types of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great option to replace or upgrade windows for fire escapes since they open at a full 90-degree angle. They can also be lowered into an 'easy clean' position, allowing you to easily access the outside of your windows to clean them without having to climb a ladder or lean over at potentially dangerous angles.
These heavy duty egress hinges are made by Yale one of the most popular and respected home security brands on the market today. They work with all kinds of uPVC side-hung windows. By pressing a tiny button, the window sash will be moved to the side and into the easy-cleaning position. When the window is closed, the sash will be returned to its original position.
Both 13mm and 17mm sizes are available. Depending on the size of your window, we suggest using our Egress Selection Guide to determine the best product for you.
These hinges can be used with traditional side-hung frames made from aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the windows simpler and less likely of closing the double glazing window hinge repairs accidentally during high winds. They have been tested for over 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
There are no buttons or catches The Nico Egress Easy Clean Friction Hinge is easy to use and provides a simple solution for emergency egress and safe cleaning. First, open the window to the egress (full opening) position, then press the hinge retaining clip that is located on the inner side of the bottom corner. This will release both the top and bottom catches and allow you to move the sash into the easy-cleaning position. Close the window when you have the sash in an easy-cleaning position. This will set the hinges back to their Egress positions.
Fire-Escape double glazing hinge repairs
Fire Escape Hinges are often referred to as “Easy Clean” hinges are used to replace windows that open sideways for egress (fire safety) reasons. These types of window hinges (https://king-wifi.win/wiki/10_Websites_To_Help_You_Develop_Your_Knowledge_About_Upvc_Hinges) open more wide and faster than standard hinges to allow an expansive clear opening to escape in the case of an emergency fire. This type of hinge is legal in any room that has a window, as required by building regulations.
They feature an exclusive friction stay that allows the window to be opened to a 90 degree angle and also allows the opening sash to slide across when it is open to make it easy to clean the external side of the glass without having to climb ladders. The hinges are easy to use and have no complicated buttons or catches. They can be operated from inside of the house with a safe, simple lever.
The hinges are manufactured in the UK by Cotswold and come with a child safety limiter for day-to-day use that can be overridden by a hidden button, giving you peace of mind that your children will not accidentally open the door too far. They are available in 13mm or 17mm stack heights.
To order these hinges, simply measure the length of your current side-hung window hinge that fixes to the frame (see the article on measuring your upvc window hinges). Select the proper size hinge from the options below.
It is important to note that this measurement is taken at the hinge's point that attaches to the frame and not the sash. The actual hinge length can be longer or shorter dependent on how the windows were made in the past. When deciding the width of the hinge the majority of frames made of upvc can accommodate with a height of 13mm however if your previous window frame is 17mm, choose this option. You can also install the 4mm packer to make up the difference. The hinges locks are available in two different directions (1 left and one right). The hinges are not equipped with screws. These can be bought separately if required. We suggest using our upvc window hinge repair screws. These screws are designed to improve your hinges' performance and allow them to operate effortlessly for a longer. They have a lower friction design and a better weather seal with a new nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open a window fully. These child safety hinges are a solution to this problem and provide a solution for situations where ventilation is required but access to clean up or escape in the case of fire isn't possible. They limit the number of times you can opening the sash, and allow for the bypass of this limitation by pressing an appropriate button. They are available in 13mm and 17mm stack heights and can be used to open both top and side hung windows.
The Nico Restricted Egress Friction Hinges blend the benefits of a standard restrictor and a fire escape pivot to offer a simple and efficient way to meet building regulations. It is suitable for side hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It comes in a pair that has one hinge which is the one with restricted egress and the other the unrestricted. This lets one hinge be installed at the bottom and the other is set at the top.
These uPVC restricting hinges have been tested to BS6375 Part 2 and are designed for use on a window that isn't able to be fully opened, such as a small children's bedroom. The mechanism restricts the amount the sash can open up to the safety level of 100mm and re-engages once the window is closed.
Like the other kinds of uPVC friction hinges they can be installed on all types of windows and are ideal for those difficult to access windows above ground level three-storey flats and those that would normally require a ladder to access them. These can be enhanced by our security features, including hinge guard protection plate or dog bolts to attain PAS 24 performance.
When replacing a hinge on a window, it is essential to measure the length of the current hinge so that you can order replacements that match in size. This can be done by looking through the image gallery of the hinge and then deciding where you want it positioned. The top hung hinges can only be placed on one side, while the side-hung hinges can only be positioned on one side.
Standard Hinge
Standard hinges feature metal-to-metal contacts and do not require any additional parts to help reduce friction. It's available in a variety of finishes and is also fire rated. For a quick way to determine the radius of your hinge put it on its flat surface and align with a quarter and dime in two corners. If the dime is more snug and the corner is round by 1/4 inch; if the quarter fits better, it's rounded by 5/8 inch.
Choosing the right type of hinge can determine the success or failure of your door's appearance. It's important to match the style and finish of your double glazing door hinges to its hinges for a cohesive design that is both functional and visually attractive.(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)
