This area explains fax setting specifications. TX Settings (Transmission Settings)
Defines the settings for sending out a fax. Immediate TX
Sets the device to send out a fax for android right away when the initial is scanned. Default: [Off] Select this when utilizing Memory Transmission. Select this when utilizing Immediate Transmission.
Next Fax Just Select this when utilizing Immediate Transmission for the next transmission just.
Resolution Defines the resolution to utilize for scanning originals.
Default: [Requirement] Basic
Select this when the initial is a printed or written file with normal-sized characters. Great
Select this when the initial is a file with fine print. Image
Select this when the initial consists of images such as photos or shaded illustrations. Density
Defines the image density to utilize for scanning originals. Default: [Typical] Light Regular
Dark Time Out Secret Time
Defines the length of time out time when a time out is placed in between the digits of a fax number. Default: 3 seconds
1 to 15 seconds, in 1 2nd increments Automobile Redial
Sets the maker to redial the fax location immediately when the line is hectic or a transmission mistake happens, if the device remains in Memory Transmission mode. The variety of redial efforts is predetermined to 2 or 3 times, depending upon the [Nation Code] setting under [Admin Settings], in five-minute periods.
Transmitter Header Sets the device to include a header to every fax you send out. The header consists of the present date and time, user fax name and number, task ID, and page details.
RX Settings (Reception Settings) Defines the settings for getting a fax.
RX Mode Defines the reception mode.
Default: [Fax Just] Fax Just
The maker instantly addresses all inbound contact fax reception mode. Handbook
When it receives incoming calls, the maker rings. The maker gets faxes just when you by hand get faxes.
FAX/TAD The maker gets faxes immediately when a fax call is gotten. Otherwise, the linked telephone answering gadget addresses the call.
FAX/TEL The device gets faxes instantly when a fax call is gotten. Otherwise, the device begins to ring.
Automobile Decrease Sets the device to decrease the size of a gotten fax if it is too big to print on a single sheet of paper.
Keep in mind that the maker just minimizes the size to 74%. If more decrease is needed to fit the fax on a single sheet, it will be printed on different sheets without being minimized.
Default: [On] (Default might be [Off] depending upon the [Nation Code] setting under [Admin Settings])
Off On
Ring Count Hold-up Defines the variety of times the maker rings prior to it begins to get faxes in Fax Just mode.
Default: 3 times 3 to 5 times, in increments of 1
F/T Ring Time Defines the length of time the device attempts to identify the fax calling tone in FAX/TEL mode.
Default: 15 seconds 5 to 99 seconds, 1 2nd increments
Tray Settings Tray Usage: Fax
Defines the tray for printing got faxes. Keep in mind that just A4, Letter, or Legal size paper can be utilized for printing faxes. Ensure to choose a tray which contains paper of the legitimate size.
Just [tray 2 is not set up Tray1 Just] appears. Default: [Car] Car If they include paper of the same size, the machine uses tray 1 and tray 2. In this case, the maker begins to print from tray 1. If tray 1 lacks paper, the device immediately changes to tray 2 to continue printing. If tray 2 lacks paper, load paper in tray 1.
Tray1 Just Tray2 Just
Erase File Deletes unsent fax tasks staying in the device's memory.
This function is just carried out when chosen. Memory Task Clear
To erase a fax task, choose the preferred task, and after that choose [Clear] Picking [Unclear] exits to the previous level of the menu tree without erasing the fax task.
All Clear To erase the fax tasks, choose [Clear] Picking [Unclear] exits to the previous level of the menu tree without erasing the fax task.