Autowatch Ghost II Immobiliser Installation
(Image: https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311135906_1281855972636056_2987376612771239945_nlow.jpg)Ghost immobilisers are among the most advanced features in vehicle security. They are revolutionary in how to install ghost immobiliser they protect your car from hacking, key-cloning & even wheel jacking.
The system has an unique disarm sequence which requires the correct PIN code to start your vehicle. This is done by pressing the buttons on your dashboard or steering wheel.
TASSA Approved
The brand new TASSA verified Ghost-II CAN immobiliser from Autowatch is a revolutionary device designed to fight recent criminality trends, such as key cloning and hacking. This innovative system connects directly to the onboard CAN network of your vehicle, and prevents it from being turned on or driven if you don't have the correct code. The system is completely undetectable and doesn't make use of radio frequencies or a key fob, instead it lets you create an individual PIN sequence using the buttons on your vehicle, such as the ones on your dashboard or steering wheel, which you can change at anytime. You can create a PIN as long as 20 presses long to ensure maximum security and an emergency code that is secure is provided too.
The system communicates with the vehicle's CAN data network in order to detect when the PIN is entered. This is then sent to the vehicle, which disables the ignition, engine and shuts off vital components like the starter motor and fuel pump. The system comes with a “valet' mode that allows you to deactivate it and prevent valets or staff from driving your car without the proper key.
The Ghost device is unlike conventional immobilisers, which can be deactivated with professional diagnostic tools. It utilizes the onboard network to communicate with ECUs and cannot be altered. It's a sealed device, which means it is impossible to listen into the circuits, which makes it near impossible for thieves to detect the clicking noise that traditional immobiliser relays make.
This technology is also not susceptible to jamming devices used by high-tech thieves. Additionally, because it is based on the CAN data network it's also undetectable to any other diagnostic tools. This means it's a perfect anti-theft solution for every modern vehicle.
We will visit your office or home to complete the installation after you've scheduled it. We will walk you through the full demonstration with you, and provide you with an owner's manual, emergency cards and two autowatch ghost installation window stickers and a installation certificate.
Insurance Approved
The Ghost is an aftermarket security gadget that safeguards your vehicle from the kinds of thieves who would be interested in stealing your car. It prevents your engine from starting unless a specific sequence of buttons is activated. The sequence is only understood by you, and when your car is stolen thieves, they won't be in a position to start it, and are likely to leave your vehicle to avoid being caught. The ghost also comes with a silent mode which will disable the vehicle if not in use and can be turned off with the press of a button.
The system is fully TASSA (Tracker and Aftermarket security systems association) insurance approved, meaning it is recognized by a few insurance companies as an additional security measure on your vehicle. It can be added alongside other Thatcham approved security measures like trackers to prevent your vehicle from being taken and also gives you peace of mind.
In addition to this it communicates with your vehicles ECU via the CAN data circuit. This is undetectable by diagnostic tools and completely silent. The Ghost cannot be tampered with by a criminal simply by inserting an additional key to the vehicle or replacing the ECU. The system will only start your car if you enter the correct pin code. This unique pin code is only known to you and is able to be changed at any time.
The ferrari ghost installer is a discreet immobiliser that can be added to most vehicles without the need for wiring or adding after market key fobs. It is directly linked to the vehicle's CAN data network and a PIN number is programmed by pressing the buttons on the dashboard or steering wheel. This code will stop the vehicle from starting until the correct sequence is entered first. If the code is guessed there are safe emergency codes that can be reset via your mobile phone. There is also an application that works on iOS and Android to decrease the need to enter pins each time, giving greater security.
Discreet
In contrast to the GPS tracker, which aids in locating your car after it has been taken away, an immobiliser system prevents the vehicle from being stolen in the first place. This is accomplished by stopping the engine from starting until the correct code is retrieved from the key fob, or an app downloaded onto the smartphone. This is the best method to stop wheel jacking as well as other types of theft as the person who steals your car will have no choice but to leave your car in peace or risk getting arrested.
The ghost immobiliser, a small weatherproof device, is tucked away inside your vehicle's wiring harness. It is connected to the CAN data network, and is concealed so that thieves cannot find it or disable it with simple wire cutting. The system also comes with the option of a service mode that can be enabled to allow your garage to work on your vehicle without needing to know the passcode in order for it to begin.
Once the device has been installed in your vehicle, it can be disarmed and armed using an app on your smartphone. You can even change the PIN code at any point to ensure that only you have access to your vehicle. This is helpful when you are planning to sell your car in the near future in order to increase the price of resales.
The Ghost immobiliser comes with a unique feature: it's discreet and won't leave any marks on the inside body of your vehicle, making it a perfect addition to any car. It's easy to fit, works silently and won't disrupt any other systems within your vehicle.
Many people are putting more importance on the appearance of their cars and a subtle immobiliser can add to the look and feel of your car. This is especially attractive for those who frequently use their cars to transport expensive goods because it can help deter any potential thieves from targeting them. The ghost immobiliser works together with other anti-theft systems like trackers to provide unparalleled protection for your vehicle.
Low Maintenance
A Ghost immobiliser is connected directly to your CAN data network and is virtually undetectable since it doesn't use any LED indicators or other key fobs. It doesn't emit any radio signals, and is quiet so that thieves won't be able to hear it working. The device can be concealed in a variety of places (even beneath the floor mats) and is a great option for those who want to secure their vehicle without compromising on aesthetics.
This device stops you from starting your car unless you have a unique password. This is done by pressing a combination of buttons located on your dashboard and the steering wheels in a specific sequence. This makes it impossible for thieves to copy or hack into your system, and will prevent the vehicle from starting.
Thieves may also try and increase the signal strength to gain access to your vehicle, however the Ghost will be able to detect this and prevent your vehicle from starting until you enter the correct disarming sequence. Contrary to other security systems that can be activated through entering the incorrect code, the Ghost will not allow your car from starting until you type in the correct passcode.
The Ghost will remain in service mode until you turn it back into service mode which is activated by pressing the same button combination as you used to arm it (this is possible when you go to your dealer for maintenance or warranty work). This is to prevent it from being taken away by unauthorised persons and to ensure that it is ready to be rearmed if required.
If you decide to switch vehicles in your ownership it is possible to transfer the Ghost to the new vehicle if the new vehicle is compatible. The most recent version of Bmw M4 ghost installer also comes with QR finger print stickers that are connected to the International Security Register, meaning that should your Ghost is stolen for parts, it will be traced back to you and your vehicle. This can discourage thieves from stealing vehicles equipped with Ghost because they know that they are safe and could be caught and arrested.