Choosing Upvc Window Replacement Hinges
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)Selecting and fitting upvc windows replacement hinges isn't as difficult as you might imagine. Make sure the hinges' arrows are facing the correct direction and determine the thickness of the hinge arms on the opening frame (13mm or 17mm).
There are several different types of hinges, each with its own unique features. This article will focus on the most commonly used kinds of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great choice for replacing or upgrading the fire escape safety window because they open at a full 90-degree angle. They can also be removed into an 'easy clean' position, allowing you to easily access the exterior of windows to clean them without the need to climb a ladder or lean over at potentially dangerous angles.
These egress hinges are heavy-duty and are made by Yale which is among the most well-known and reliable home security brands available today. These hinges are suitable for any type of uPVC side-hung windows. By pressing a small button, the window sash will be moved to the side and into the position that is easy to clean. When the window hinge broken is closed, the sash will revert to its original position.
Both 13mm and 17mm are both available. Make use of our Egress Selection Guide to help you determine the best product for your window.
These hinges can be fitted to conventional side-hung frames made of uPVC, or aluminium. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the risk of an accidental closure in severe winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
The Nico Egress Easy Clean friction hinge is easy to use and doesn't have any buttons or catch. It is a simple and safe solution to emergency exit and cleaning. The hinge retention clip is located in the inner corner of the bottom corner. This will open the top and bottom catches which will allow you to move the sash into the easy-clean position. Once it is in the easy-clean position, close the window to reset the hinges to their egress position.
Fire-Escape Hinge
Fire Escape Hinges (also known as “Easy Clean”) are used to replace windows with side openings to protect against fire. These types of window hinges open wider and faster than normal hinges, allowing an open space to escape in the event of an incident of fire. Building regulations require that this type of hinge must be installed in any space that is habitable and has a window.
The windows have the benefit of a friction stop that allows them to open at 90 degrees. They also let the opening sash to slide over the glass when opened which allows for easy cleaning without the need to use ladders. The hinges are easy to use and have no complicated buttons or catch mechanisms. They can be operated from the inside of the house using a safe, simple lever.
The hinges, made in the UK by Cotswold and Cotswold, have the safety of children in daily use. It can be reverted with a hidden button. You will have peace of mind knowing that your children won't accidentally open the doors too far. They are available in 13mm or 17mm stack heights.
Measure the length of the side-hung window hinge that is fixed to the frame. (See the guide for measuring upvc window hinges). Select the proper size hinge from the options below.
It is important to note that the measurement is taken from the part that is fixed to the frame and not the sash, the actual hinge length could be shorter or larger based on the manufacturing process of your old windows. When choosing the width of your hinge most windows made of upvc will have 13mm stack height, however should your old frame has 17mm, then select the option for this. You can also opt for the 4mm packer in order to make up for the difference. All the hinges are supplied with two hands (1 left and one right). The hinges do not include screws. If required, these screws can be purchased separately. We suggest using our upvc window hinge repair screws. These screws are designed to enhance your hinges' performance and allow them to operate efficiently for a longer. They have a lower friction design and a better weather seal that is fitted with a new nylon reducer cap.
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/09/Replacement-Windows-150x150.jpg)Restricted Hinge
There are times when windows must open fully and this can be a problem using the standard hinge. The restricted child safety friction hinges are a solution to this problem and offer a fantastic solution when ventilation is required but access to clean up or escape in the event of fire is not feasible. They limit the possibility of opening the sash and allow overriding this restriction by pressing a button. They are available in 13mm and 17mm stack heights. They can be used for both top and side hung windows.
The Nico Restricted Egress Friction Hinge blends the characteristics of a standard restrictor with a fire escape hinge to offer an efficient and simple method to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It is available as a pair where one hinge is the restricted egress and the second is unrestricted, allowing one hinge to be placed to the bottom of the sash whilst the other is attached to the top.
These uPVC restrictive hinges have been tested to BS6375 part 2 and are designed to be used on windows that cannot be fully opened like a small child's bedroom. The mechanism restricts how to replace window hinges far the sash can open to a safe position of 100mm and then it re-engages after the double glazing window hinge repairs is shut.
These uPVC friction-style hinges can be used on all kinds of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey homes or those that require ladders. These can be enhanced with our range security enhancements, like hinge guards and protection plates for the hinge or dog bolts, to achieve PAS 24 performance.
When replacing a window hinge, it is essential to determine the length of the current hinge so you can purchase replacements that are similar in size. The most efficient method to do this is by viewing the hinge in the gallery and working out the location you would like it to be placed. The hinges that hang from the top can only be placed on one side, while the side hung ones can only be positioned on one side.
Standard Hinge
Standard hinges feature metal-to-metal contacts and don't require extra parts to reduce friction. It is available in a variety of finishes and fire rated. For a quick way to determine the radius of your hinge, lay it flat and then line up a dime and quarter in two corners. If the dime is more snug, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.
The hinge you choose can enhance or break the appearance of your door. Achieving the same design and style of the hinges to your door will give it a cohesive and attractive appearance.