Choosing Upvc Window Replacement Hinges
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2014/12/doorpanels-300x200.jpg)It's not as difficult as it might seem to choose and fit Upvc replacement hinges. Check that the hinges' arrows face in the correct direction, and measure the thickness of the hinge arms on the frame opening (13mm or 17mm).
There are many different kinds of hinges, each having their own unique features. This article will discuss some of the most commonly used uPVC hinges and their benefits.
Egress/Easy Clean Hinge
They are an excellent choice for replacing or upgrading windows for fire escapes, as they open at a full 90-degree angle. They can be closed to a 'easy-clean' position which allows you to get access to the outside of windows without the need how to replace upvc window hinges climb ladders or lean over dangerous angles.
Yale is among the most trusted and well-known brands in the home security industry. These hinges are suitable for any type of uPVC side-hung casement window hinge parts. By pressing a small button the window sash is slid how to change hinges on double glazed window the side, and then into the clean position. Once closed, the window sash will revert to its original position.
They are available in 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.
The hinges are designed to work with a standard side-hung frame that is made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window and reduces the risk of an accidental closure in severe winds. They have been cycle tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
The Nico Egress Easy Clean friction hinge is simple to use and has no buttons or catches. It offers a convenient and safe solution for emergency exit and cleaning. First, open the door to the egress (full opening) position and then press the hinge retaining clip on the inner side of the bottom corner. This will release the bottom and top catches and allow you to slide the sash back into the clean position. Close the window when you are in the easy-cleaning position. This will reset the hinges to their exit positions.
Fire-Escape Hinge
Fire Escape Hinges (also called “Easy Clean”) are used to replace side-opening windows to ensure fire safety. These types of window hinges open more wide and faster than conventional hinges to provide a large clear opening for escape in the event of an incident of fire. Building regulations stipulate that this kind of hinge must be installed in any space that is habitable and has a window.
They feature an exclusive friction stay that opens the window to a 90 degree angle and also allows the opening sash to slide across the glass when it is open to allow easy cleaning of the exterior side of the glass without having to climb ladders. The hinges are easy to use and have no complicated buttons or catches. They can be operated from inside of the house using a simple, safe lever.
The hinges, which are manufactured in the UK by Cotswold are fitted with a child safety feature for daily use. This can be overridden with a hidden button. You will have peace of assurance that your children won't open the windows too far. The stack heights are 13mm or 17mm.
To order these hinges simply measure the length of your existing side hung window hinge that is fixed to the frame (see the guidelines for measuring the length of your window hinges made of upvc). Select the correct size hinge below.
Be aware that the measurement is taken from the component that attaches to the frame not the sash, the actual hinge length could be shorter or longer based on the manufacture of your old windows. When deciding on the width of the hinge, most upvc frames will fit a stack height of 13mm, but if your old window frame is 17mm, choose this option. Alternatively you can fit the 4mm packer to make up for the difference. All the hinges are supplied in pairs (1 left and one right). Screws are not included with the hinges. If needed, they can be purchased separately. Our upvc window repair screws are recommended. These screws are designed to improve your hinges' performance and allow them to operate smoothly for longer. They have a reduced-friction design and a more durable weather seal with an encapsulated nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open a window fully. These child safety friction hinges are a fantastic solution to this problem. They can be used in situations where ventilation is needed but cleaning or escape from the flame is not feasible. They restrict the amount of opening the sash and allow overriding this restriction by pressing the button. They are available in 13mm or 17mm stack heights and are suitable for top and side-hung windows.
The Nico Restricted Egress Friction Hinges blend the benefits of a standard restrictor and an escape pivot to provide a simple and efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and is suitable for the top and side openings of uPVC window. It is available as a pair of hinges where one hinge is restricted egress and the other unrestricted allowing one of these to be installed at the bottom of the sash while the other is fitted to the top.
These uPVC hinges are made to be used with windows that aren't able to be fully opened, such as the bedroom of a child. The mechanism limits the extent to which the sash can open up to a safety position of 100mm and re-engages once the window is closed.
Like the other kinds of uPVC friction hinges they can be installed on any type of window and are ideal for those hard to reach windows above ground level three-storey flats and those that typically require a ladder to reach them. They can be combined with our selection of security enhancements such as hinge guard protection plates or dog bolts for PAS 24 performance.
When replacing a fix window hinge hinge it is crucial to measure the length of the current hinge so that you can purchase replacements that are similar in size. This can be done by looking through the image gallery of the hinge and deciding where you want it positioned. The top-hung hinges can only be positioned on one side, whereas the side hung ones can only be placed on one side.
Standard Hinge
A standard hinge uses metal-to-metal contact and no extra parts to decrease friction. It is available in a variety of finishes and also comes with a fire rating. To quickly determine the radius of hinges, lay it out flat and align a quarter and dime in two corners. If the quarter fits better, then the corner should be round to 5/8 inches.
(Image: https://www.repairmywindowsanddoors.co.uk/wp-content/uploads/2018/11/Window-Repairs.-150x150.jpg)The right hinge can make or break your door's appearance. It's important to match the finish and style of your door with the hinges to create a seamless look that's both practical and visually attractive.