(Image: [[https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg|https://www.thekeylab.co.uk/wp-content/uploads/sb-instagram-feed-images/311159893_995841588058766_6213964028136182559_nlow.jpg]])Replacing a Dead [[https://parkskiing4.werite.net/kia-ceed-key-fob-replacement-the-good-and-bad-about-kia-ceed-key-fob|Kia Ceed Key]] Fob Kia Ceed owners appreciate the convenience of remote keyless entry. The key fob, like any other device, may stop working due to a number of reasons. The good news is that replacing the battery is simple and inexpensive. (Image: [[https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1-152x69.png|https://www.thekeylab.co.uk/wp-content/uploads/2022/07/cropped-KeyLab-1-152x69.png]])The key fob is powered by the 2032 lithium coin battery, commonly known as a CR2032 and found in many other electronic devices. A standard flathead screwdriver will be all that is needed to open the key fob and then replace the battery. Keyless entry The smart key fob of the KIA Ceed is an increasingly popular feature which makes it easier to lock, unlock, and start the car. If yours isn't working, it could be due to the battery being dead or another problems. The remote's electronics and functions could be affected in the event that the battery isn't functioning properly. Check the metal clips in the fob and make sure they are fully connected. You may need to clean the fob with isopropyl, or a soft cloth to eliminate any water-based residue. The key fob's push buttons in the front door handles transmit LF-antenna signals to the vehicle. The vehicle's LF transmitters located in the tailgate, trunk or door handles read the challenge. They then transmit a response. The information is transmitted via a serial communication line from the SMK ECU. It's crucial to fix any problems with your [[http://www.stes.tyc.edu.tw/xoops/modules/profile/userinfo.php?uid=1877152|kia transponder key]] [[https://toptohigh.com/author/liquorsponge05-291564/|key replacement Kia]] fob before they worsen. Thankfully, replacing the battery in the [[https://hong-macleod-2.blogbright.net/10-things-you-learned-in-kindergarden-that-will-help-you-get-kia-picanto-key-replacement/|lost kia key]] key fob is easy and takes just several minutes. Find a small slot usually on the opposite side of the keyhole. Then, gently insert a flathead screwdriver into the slot and remove the plastic casing, without harming the internal components. Remote start There are a few things you can do in the event that your [[https://lauratoy85.werite.net/the-reasons-replacement-kia-key-isnt-as-easy-as-you-think|kia car keys]] Ceed remote start key fob [[https://hunt-mcneil.thoughtlanes.net/what-is-kia-key-fob-and-why-is-everyone-talking-about-it-1717463211/|how much is a replacement kia key]] not working. First, check the battery on your key fob. If the battery is dead the remote won't work. The next step is to check the battery connections. If the connections are damaged, then it's likely that the battery won't receive an electrical current. If the issue is not resolved, you can reset the system. Disconnect the 12 volt batteries for a few minutes to do this. This will allow any residual energy to be eliminated and the system to be reset. The internal chip of the key fob could stop working if exposed to water. You should use clean tapwater to clean the keyfob and then let it completely dry before replacing the battery. You can clean the keyfob with isopropyl or a cleaner for electronic devices. In some cases the key fob may cease to function after being dropped on the floor. This is caused by damage to the internal microchip. The key fob can also stop working due to signal interference. This could be due circumstances like weather conditions, objects that are in the vicinity of the vehicle, or transmitters operating at the same frequency. The solution is changing the programming of your key fob. This can be accomplished by turning the key off to on in the ignition until the door locks are cycled. Keyless lock Key fobs are an excellent convenience for many drivers, however it's also something that can break easily. A dead battery is the most frequent reason however, you could also be experiencing issues with the door locks. The good news is that a quick trip to the dealer is enough to fix the issue. The Kia Ceed's smart keys simplify your life by making it possible to unlock the car without taking it out of your purse or pocket. To unlock your car, place the key fob in close proximity to the vehicle and press the lock button twice for the trunk and then once for the driver door. Both the traditional Kia key fob and the smart Kia make use of standard 2032 battery that are available in most supermarkets and online stores. This type of battery can also be used to power small electronic devices like calculators or watches. To replace the battery, look for the small button that releases the mechanical blade and take it off. Then, you can place the new battery in an opening that matches the dimension of the emergency key blade. If you're having issues with your key fob, ensure that all metal retaining clips are securely fastened and there's no evidence of water damage. It's recommended to keep the contact points clean regularly. If these steps aren't working then you might have to visit an authorized dealer for reprogramming. Remote trunk release You can remotely unlock and lock the Kia Ceed trunk or tailgate by using a key fob. This feature is especially useful when you are away from your vehicle, and you want to make sure that the trunk is not locked or open. Press and hold the button of your Smart FOB for at least a half second to activate this feature. Then, press the button again to deactivate it. The key fob can be used as an alarm to make thieves feel uncomfortable or aid in locating your vehicle in a large parking lot. A dead battery in the key fob is the main reason for the Kia to not work. You could replace the battery within one minute. You'll require an screwscrew with a flathead and a replacement case for the key fob to do this. Find the small slot on the side. Place the screwdriver into the slot and then gently wedge the tool until the case pops off. Replace the old battery with a new one. Another reason that could cause the Kia key fob's not working is water damage. This could happen if the key fob gets wet, as if you spill water on it or drop it in the rain. If this happens, clean the electronic component with paper towels and isopropyl alcohol before changing the program. You can also try restarting the computer that is onboard by removing the 12 volt battery for a short period of time.