DokuWiki

Edit the page and hit Save. See syntax for Wiki syntax. Please edit the page only if you can improve it. If you want to test some things, learn to make your first steps on the playground.

Why You Need a Ghost 2 Immobiliser Fitting Near Me

(Image: [[https://www.thekeylab.co.uk/wp-content/uploads/2022/06/KeyLab-1-e1658690716312-300x146.png|https://www.thekeylab.co.uk/wp-content/uploads/2022/06/KeyLab-1-e1658690716312-300x146.png]])Modern day thieves can take vehicles in less than a minute. They use the OBD port of the vehicle to hack into the ECU and then duplicate a key and all with a laptop that is hidden inside the vehicle.

An Autowatch Ghost immobiliser prevents this by sending a sequence of pin codes through buttons on your vehicle (steering wheel and central console). It is completely unnoticeable to anyone inside your vehicle.

No key fobs or LED indicators, or any other methods of locating the vehicle are in place.

The ghost immobiliser is a great method to protect against keyless entry theft and key cloning. This device is designed to safeguard your vehicle from these types of attacks by blocking the engine after a valid pin code has been entered. This is an extremely efficient method of protecting your vehicle, and insurance companies recognize it as a security measure that can help reduce the cost of your insurance.

The ghost is connected to your vehicle's CAN data network. Once it is installed by Car Theft Solutions, it will only work if you enter your personal override code and a specific button combination. The engine will not start when you attempt to start your vehicle without using the code. The thief will then realise that they've been caught and are likely to abandon the vehicle and run off.

One of the big advantages of this system is that it does not transmit any signals like a tracker, this means that thieves can't use RF signal receivers to locate your Ghost unit. It also doesn't transmit any IR (infrared) signals, like the typical remote control key fobs or tracker do, which makes it extremely difficult to deceive or hack.

The Ghost also has a valet-mode that can be activated when you are handing your vehicle over to a valet for parking or service. This will disable the immobiliser can for 30mph and permit you [[https://bachmann-hahn-3.technetbloggers.de/10-steps-to-begin-the-business-of-your-dream-ghost-2-immobiliser-near-me-business/|how to become a ghost immobiliser installer]] use your vehicle in normal fashion using your key fob. When the vehicle is parked up again the Ghost will regain full functionality.

Car Theft Solutions is the location to call for information more about local ghost installer ([[https://telegra.ph/11-Ways-To-Totally-Defy-Your-Ghost-2-Immobiliser-08-25|Highly recommended Resource site]]) or should you wish to have it installed in your vehicle. We are a family-owned company with more than 10 years' experience in the field of vehicle security. This includes the Ghost immobiliser installation. We are a Thatcham certified installer of Ghost products and have built our reputation on the basis of customer satisfaction.

No cloning, hacking or modifying

The Autowatch Ghost immobiliser is one of the most advanced models on the market. It safeguards your vehicle from key cloning and hacking which makes it almost impossible to steal. The only method to steal your car is to physically remove it. Even then, they wouldn't be able to start the engine.

This is because unlike other immobilisers which simply stop your vehicle from starting if don't have a fob, the innovative system actually cuts off the engine control unit in order to prevent the vehicle from starting. The system communicates a message through buttons on the steering wheel, door panel or centre console. It can only be disarmed using the proper pin code configuration.

Its sleek and discreet design allows it to seamlessly into your car without the need for additional keys or LED indicators. It operates independently of the factory tracker or alarm. It is also a CAN bus immobiliser meaning that it sits within the control area network of your vehicle and does not interfere with other devices, such as the built-in key fob or alarm.

This unique technology is not visible to thieves and other systems that rely on RF scanning and code grabbing. It simply sends pin codes in a silent manner through the buttons on your vehicle's steering wheels or door panels, or central console. The [[https://telegra.ph/The-Most-Underrated-Companies-To-Watch-In-Ghost-Immobiliser-Installation-Industry-08-25|ghost 2 immobiliser problems]] is a revolutionary device that defends your vehicle from keyless entry and smart key theft by producing an individual, personalized pin code that must be entered to deactivate it.

The number of vehicles that have no keyless entry in circulation is increasing. Thieves are becoming sophisticated and are using devices for cloning that can be purchased on the internet or in classifieds less than PS15. The key fob that is cloned can be used to gain access to the vehicle. A standard immobiliser for vehicles only stops the engine from running if they have your original key fob. This does not offer enough security and is easy for criminals to steal or jam signals to unlock the vehicle.

Valet mode

A standard immobiliser fitted to your vehicle is an electronic chip which sends a signal when you hit your key fob button. The system will then search for the particular code you have that was sent from the key to start the vehicle. If the correct signal cannot be detected the system will shut off the power and prevent the vehicle from starting. This is the basis of all immobilisers that are sold aftermarket. It is a vital measure to safeguard your car from being taken away, even if someone has your keys or a device that could boost the signal of your key fob.

However, a ghost immobiliser does not just stop it however, it goes far beyond that. The system, which is located on the CAN Bus of your Mercedes, has been programmed with a unique pin code that has to be entered to begin the vehicle. It is then secured on your application and nobody can ever access it unless they have the same unique pin that you have.

The system will also stop signal jamming, cloning and hacking (which thieves could use to bypass the immobiliser on your vehicle). If a thief gets their hands on the keys to your car or fob, they will not be able to start your vehicle even if it is located nearby. They could only get your car off a flatbed truck, which is highly unlikely.

Valet mode is a handy feature that is included with your ghost immobiliser. When it is activated the glove box as well as trunk of your vehicle will be locked. This means that anyone trying to steal your car won't have anything personal to take. It will also limit the speed of your Tesla so that it can't be driven over 70mph and will disable ludicrous mode. It will also lock your driver profiles and hide your home or work addresses so that no one else has access to your private data on your Tesla dashboard.

If you wish to use your vehicle for valet parking or for service purposes, just select the 'Valet/Service' feature on your dashboard app and enter the 4-digit valet pin you have on the touchscreen. The alarm will no longer work, however the car won't start unless you enter a valid pin. This is ideal for people who need to transfer their vehicle to others, such as taxi drivers and garage mechanics.

The world's first aftermarket immobiliser for CAN buses

The Autowatch Ghost is the world's first aftermarket CAN bus immobiliser and provides security unmatched by anything available today. It protects your car from key cloning, hacking, and even key theft. This is accomplished through the vehicle's current interface. It does not require additional remotes or fobs, but instead integrates into your vehicle's CAN data network. This makes it a 'stealth device.

The device is an invisible circuit board that connects to your car's engine management system (ECU) and functions in a non-silent manner. Once activated, it will stop the car from starting until you enter a PIN. This is a unique number you will receive when you make an appointment for installation. This number is required to enable valet mode, turn off the alarm or allow you to leave in your friends car (if they have [[https://dickinson-lanier.mdwrite.net/how-to-tell-if-youre-ready-for-autowatch-ghost-immobiliser-fitting/|ghost 2 immobiliser installation]] installed). Ghost installed too).

It is designed so that it cannot be detected by anyone who is looking into your cars interior, it doesn't transmit radio signals and will only be heard when it's activated. It can be fitted in a variety of places, making it nearly impossible to spot. It is also a low-maintenance device and can be fitted in conjunction with other systems, such as a tracker (Brand dependent) to provide a more complete anti-theft solution.

Many people choose to fit an immobiliser that ghosts because they believe that the standard security isn't enough to stop their joy and pride from being taken. While physical deterrents such as locking the steering wheel and wheel clamps are a good alternative, they aren't really considered "theft proof" by thieves as they can be defeated quite easily using the right tools. A ghost immobiliser is not accessible to thieves since it is built into the vehicle and, if activated would stop the starter motor or fuel system.

The best part is that ghost immobilisers can be installed for as low as PS450 which is less than the price of other options out there - and it actually does prevent your car from being stolen! If you want to provide an extra layer of protection to your pride and joy call us today to make sure we can book it in for you. We accept card payments or offer three months of interest-free credit through Klarna.

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International